Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Tai

Bewerking goedgekeurd door Sam Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] A thumb nail or plastic prying tool should make quick work of popping off the black plastic shield on the bottom
[* black] Do the same thing to remove the white plastic shield around the top of the device (this may take some slight prying)
[* icon_note] The upper shield (nearest the camera and volume buttons) is required to be firmly in place for sound to work - alcohol cleaning the goldfingers on the motherboard + contact pads on the shield then tightening the screws may fix sound issues.