Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Cole O'Neal

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] With the back it reveals a familiar design that of the LG Nitro (P930).
[* black] Using a Phillips #00 screw
Use ascrew bit/driver remove all visible screws.
[* black] Don't worry about placement all the screws are the same except the one blackicon_note] The screw I have marked withcircled in red is different from the red "o"others.
[* black] With the back it reveals a familiar design that of the LG Nitro (P930).
[* black] Using a Phillips #00 screw
Use ascrew bit/driver remove all visible screws.
[* black] Don't worry about placement all the screws are the same except the one blackicon_note] The screw I have marked withcircled in red is different from the red "o"others.