Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Cole O'Neal

Bewerking goedgekeurd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Starting from the bottom corner usingcorner, use the thin blunt side of a Spudger I separatedto separate the back from the metal bezel. THIS CAN CAUSE COSMETIC & INTERNAL DAMAGE if you are not careful.
[* black] You could useUse a thumb nail, plastic spudger, or pry tool to move upraise one side releasing the plastic clips. Then raiseraise the other side and the top should pull off with ease.
[* black] NOTE:icon_note] During reassembly the back may fight a little to go back on. Start from the side and go around do not be afraid to pinch it with a little muscle.
[* black] Starting from the bottom corner usingcorner, use the thin blunt side of a Spudger I separatedto separate the back from the metal bezel. THIS CAN CAUSE COSMETIC & INTERNAL DAMAGE if you are not careful.
[* black] You could useUse a thumb nail, plastic spudger, or pry tool to move upraise one side releasing the plastic clips. Then raiseraise the other side and the top should pull off with ease.
[* black] NOTE:icon_note] During reassembly the back may fight a little to go back on. Start from the side and go around do not be afraid to pinch it with a little muscle.