Wijzigingen aan stap #10
Bewerken voor Angela Penaherrera —
Bewerking goedgekeurd door Angela Penaherrera
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Join both white |
|---|---|
| + | [* black] Join both white cable wires and solder them together. |
| [* icon_caution] Remember that the white cable from the AC adapter NEEDS to be soldered to the white cable from the chord that comes from the MacBook connector. | |
| [* black] The black tube on the cable is to isolate it later, you can use heat to shrink it. | |
| [* icon_note] The last pic shows the black rubber tube, you can cut it up to fit the length you need. | |
| - | [* icon_caution] It is very important to isolate both |
| + | [* icon_caution] It is very important to isolate both wires, they cannot touch each other or else they will short circuit (in other words: Kaboom!). |