Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Amos Hine

Bewerking goedgekeurd door Amos Hine

Voor
Na
Ongewijzigd

Stap regels

[* red] Removeblack] Turn the four 2.9mm PH0 screws with a philips head screw driverkeyboard bezel around so that the touchpad is closer to you.
[* black] OnceDisconnect the screws have been removed disconnectribbon cable from the receptacle on the touchpad circuit board. The ribbon cable connectedwill not fall away because it is glued to the keyboard bezel.bracket that holds the touchpad in place
[* icon_notered] Remove the four 2.9mm screws from the bracket using a phillips PH0 screwdriver.
[* black
] To dislodgeremove the touchpadtouchpad, simply push the touchpad from the top of the keyboard bezelbezel (the touch-sensitive side, not circuit board side). This should require almost no force.
[* red] Removeblack] Turn the four 2.9mm PH0 screws with a philips head screw driverkeyboard bezel around so that the touchpad is closer to you.
[* black] OnceDisconnect the screws have been removed disconnectribbon cable from the receptacle on the touchpad circuit board. The ribbon cable connectedwill not fall away because it is glued to the keyboard bezel.bracket that holds the touchpad in place
[* icon_notered] Remove the four 2.9mm screws from the bracket using a phillips PH0 screwdriver.
[* black
] To dislodgeremove the touchpadtouchpad, simply push the touchpad from the top of the keyboard bezelbezel (the touch-sensitive side, not circuit board side). This should require almost no force.