Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerken voor April Driscoll

Bewerking goedgekeurd door April Driscoll

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove the back cover by sliding it off.
[* black] Remove the three triple A batteries
[* black] Unscrew the nine exterior screws on the back panel by using a PHO size philips head screw driver
[* black] Remove the back battery panel carefully to avoid tearing any wires.
[* black] Unplug the battery plugs from the mother board by pulling out the plugs to fully remove back panel.
[* black] Locate the speaker needing replacing
[* black] Remove the one screw holding the speaker in place with a PHO size philips head screw driver.
[* black] Score the glue that is holding the speaker in place and use a prier tool to unsecure the speaker.