Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Amos Hine

Bewerking goedgekeurd door Amos Hine

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the three screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two silver, 3.4mm screws on the right, and use a PH1 for the black, 10.3mm screw on the left.
[* orange] It is not necessary to fully remove the black screw on the left10.3mm screw, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drivespring.
[* red] Remove the three screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two silver, 3.4mm screws on the right, and use a PH1 for the black, 10.3mm screw on the left.
[* orange] It is not necessary to fully remove the black screw on the left10.3mm screw, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drivespring.