Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Jared Cooper

Bewerking goedgekeurd door Jared Cooper

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the three (3)3 screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two 3.5mm screws on the right, and use a PH1 for the one10.5mm screw on the left.
[* red] Remove the three (3)3 screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two 3.5mm screws on the right, and use a PH1 for the one10.5mm screw on the left.
[* orange] It is not necessary to fully remove the black screw on the left, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drive.