Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Amos Hine

Bewerking goedgekeurd door Amos Hine

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* yellow] Remove the three (3) screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two screws on the right, and use a PH1 for the one on the left.
[* yellow] Remove the three (3) screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two screws on the right, and use a PH1 for the one on the left.
[* green] Be careful to not lose the spring from the long, black screw holding the left side of the hard drive.