Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Jonathan

Bewerking goedgekeurd door Jonathan

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* yellowred] Remove the three (3) screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two screws on the right, and use a PH1 for the one on the left.
[* greenorange] It is not necessary to fully remove the black screw on the left, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drive.
[* yellowred] Remove the three (3) screws holding down the hard drive. Use a Phillips PH0 screwdriver for the two screws on the right, and use a PH1 for the one on the left.
[* greenorange] It is not necessary to fully remove the black screw on the left, but if you do, be careful to not lose the spring from the long, black screw holding the left side of the hard drive.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 3

Oude versie

Nieuwe versie