Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Rachel Kangas

Bewerking goedgekeurd door Rachel Kangas

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Usingblack] Remove the T8 Torx screwdriver head and replace it with the 60 mm extension; then, add the T9 Torx head, loosen, but,head.
[* red] Loosen, but
'''do not remove''' the two screws at the bottom of the 1.2 inch1.2-inch wide gap going downin the middle of the deviceinternal structure.
[* icon_reminder] These screws are spring-loaded and can come out;will stay in the device, even when loosened; however, it is still possible for them to be fully removed. Be careful to not lose'''only partially loosen''' them. If you don't fully loosen the screw, then they can stay on the internal structure.
[* red] Usingblack] Remove the T8 Torx screwdriver head and replace it with the 60 mm extension; then, add the T9 Torx head, loosen, but,head.
[* red] Loosen, but
'''do not remove''' the two screws at the bottom of the 1.2 inch1.2-inch wide gap going downin the middle of the deviceinternal structure.
[* icon_reminder] These screws are spring-loaded and can come out;will stay in the device, even when loosened; however, it is still possible for them to be fully removed. Be careful to not lose'''only partially loosen''' them. If you don't fully loosen the screw, then they can stay on the internal structure.