Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Nathan Reeve

Bewerking goedgekeurd door Nathan Reeve

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Locate the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* red] Use the screwdriver extension and the T9 Torx head to unscrew the twotwo screws.
[* black] Once unscrewed, they will release the internal structure from the case. Unlike most screws, however, they will not come out of the device
.
[* red] Use the screwdriver extension and the T9 Torx head to unscrew the twotwo screws.
[* black] Once unscrewed, they will release the internal structure from the case. Unlike most screws, however, they will not come out of the device
.