Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Keith Yu

Bewerking goedgekeurd door Keith Yu

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Using the T9 Torx head, removeloosen, but, '''do not remove''' the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* icon_reminder] The internal structure will thenThese screws are spring-loaded and can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.
[* red] Using the T9 Torx head, removeloosen, but, '''do not remove''' the two screws at the bottom of the 1.2 inch gap going down the middle of the device.
[* icon_reminder] The internal structure will thenThese screws are spring-loaded and can come out; be released fromcareful to not lose them. If you don't fully loosen the case; however, unlike most screws,screw, then they will not come out ofcan stay on the deviceinternal structure.

Afbeelding 1

Oude versie

Nieuwe versie