Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door David Hodson

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] To remove the plastic guard, grab the edges and lift off the device.
[* yellow] The right edge of the plastic guard has a clip which holds it down. Using the spudger, depress on the clip and pull outthe plastic guard off of the logic board.
[* red] The next step will have you removeRemove the two remaining gold #00 Phillips screws on the logic board.
[* yellow] The right edge of the plastic guard has a clip which holds it down. Using the spudger, depress on the clip and pull outthe plastic guard off of the logic board.
[* red] The next step will have you removeRemove the two remaining gold #00 Phillips screws on the logic board.