Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Brendan Kelly

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] To remove the plastic guard simply grab the edges and lift off the device.
[* icon_noteyellow] The portionright edge of the plastic which is nearest the "L" shoulder buttonguard has a small clip, making removal a bit challenging. With a little effort you'll be able toclip which holds it down. Using the spudger depress on the clip and pull off the guardout.
[* icon_noteyellow] The portionright edge of the plastic which is nearest the "L" shoulder buttonguard has a small clip, making removal a bit challenging. With a little effort you'll be able toclip which holds it down. Using the spudger depress on the clip and pull off the guardout.
[* red] The next step will have you remove two #00 Phillips screws on the logic board.

Afbeelding 2

Oude versie

Nieuwe versie