Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #14

Bewerking door Arthur Shi

Bewerking goedgekeurd door Arthur Shi

Voor
Na
Ongewijzigd

Stap regels

[* black] Disconnect the DC-In cable from the logic board by simultaneously depressing the locking lever on the connector while pulling it away from its socket.
[* black] Remove the logic board from the outer case.
[* icon_reminder] During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.