Wijzigingen aan stap #13
Bewerking door Andrew Bookholt —
- Voor
- Na
- Ongewijzigd
Stap regels
[* black] [* icon_caution] The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components. [* black] Carefully pull the optical drive connector away from its socket on the logic board. [* icon_note] Pull the connector perpendicular to the face of the logic board. |
[* black] [* icon_caution] The following connector has a tendency to stick in its socket. If so, insert a metal spudger into the gap between the connecter and its socket. Twist the spudger to separate the two components. [* black] Carefully pull the optical drive connector away from its socket on the logic board. [* icon_note] Pull the connector perpendicular to the face of the logic board. |