Wijzigingen aan stap #1
Bewerken voor Sam Gustafson —
Bewerking goedgekeurd door Sam Gustafson
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [title] Clean ISO resistor |
|---|---|
| + | [* icon_note] The resistor assembly is crimped or pressed together and further disassembly is not possible. |
| + | [* red] Use a cotton bud and isopropyl alcohol to clean the surface of the resistive element. |
| + | [* orange] Spray a plastic safe contact cleaner in the area of the feeler contacts. |
| + | [* yellow] Rotate the dial back and forth several times. |
| + | [* green] Check the resistance at the brown wires. It should range from X kΩ to XX kΩ with no dead spots. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd