Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Wijzigingen aan stap #13

Bewerking door Mark

Bewerking goedgekeurd door Mark


Stap regels

[* black] Since you've come this far, no matter what your reason is for taking your laptop apart, I highly recommend a '''thorough fan cleaning''' which actually requires disassembly of the fan
[* red] There are '''4 small screws''' holding the top of the fan cover on - Don't be surprised if they are '''very tight'''. Just hold the other side of the fan with your other hand so you don't put too much pressure on the motherboard itself.
[* green] Once these 4 screws are removed, you'll be able to remove the top plate. '''Your work isn't done''' - you'll also notice that there's a piece of '''glued foam''' between the heat sync grille and the fan. Remove it as best you can, or simply '''cut it off''' (won't drastically affect results)
[* black] You should now be able to pull the grill away from the fan - you'll probably notice a thick rope of dust sandwiched inside the two - '''do your best to remove all of it'''

Afbeelding 1

Geen vorige afbeelding