Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Wijzigingen aan stap #2

Bewerking door Mark

Bewerking goedgekeurd door Mark


Stap regels

[* black] Start by flipping the laptop on its front cover. As you can see from mine, it's not difficult to scratch up the surface so I'd recommend putting a cloth or cupboard protector underneath
[* black] The first step is to remove the middle section housing the '''hard drive, wireless card, and ram'''
[* icon_caution] '''BEFORE YOU START''' - Make sure the battery is removed, and the unit is unplugged. It's also advised to wear an '''anti-static wrist strap''' or at least ground yourself
[* red] There are 5 anchored screws (they don't come all the way out) that need to be loosened
[* black] There is a small ridge just below the battery that helps in removing the cover. I used a '''spudger''' but if you don't have one, a small flathead screwdriver will work. Or a hard guitar pick.
[* black] Pry from the top - you'll notice small clips on the edges that hold it in place. They may require a little bit of force. Once you get to the bottom, just pull '''north''' as the clips on the bottom are larger.

Afbeelding 1

Geen vorige afbeelding


Afbeelding 2

Geen vorige afbeelding