Wijzigingen aan stap #8
Bewerken voor Uchenna Oniah —
Bewerking goedgekeurd door Uchenna Oniah
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [* black] Add flux to second pad. |
|---|---|
| + | [* black] Hold iron onto the second end of the diode and feed solder onto the board right at the tip of the soldering iron |
| + | [* black] Revisit the first end of the diode and repeat the step above to ensure a sufficient amount of flux is on the pad |
| + | [* black] Use isopropyl alcohol on a q-tip to clean any additional flux left on the board. |