Wijzigingen aan stap #1
Bewerken voor Spencer Day —
Bewerking goedgekeurd door Spencer Day
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Pry up the heat sink | |
| - | [* black] Insert wisdom here. |
| + | [* icon_note] Thermal paste bonds the bottom of the heatsink (closest to the power button) to the metal shield. Depending on the age of your device and condition of the thermal paste, separating the heatsink may take some force. |
| + | [* black] Insert the flat end of a spudger under the bend on the heat sink's bottom edge. |
| + | [* black] Use your spudger to pry up the heatsink, applying steady pressure to separate it from the thermal paste. |
| + | [* black] If the heat sink doesn't fully separate, use your spudger to pry up the bottom edge on the other side of the metal fins. |