Wijzigingen aan stap #4
Bewerken voor Maddie McCoy —
Bewerking goedgekeurd door Maddie McCoy
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Separate the circuit board piece from the joystick connection. |
|---|---|
| + | [* black] Separate the other circuit board piece from the joystick connection using the plastic spludger. |
| + | [* icon_note] ''The circuit board is wired through glue. If the plastic spudger is unable to pry the glue off, use the metal spudger as a last resort.'' |
| [* red] Take the joystick module itself and remove the four 8mm screws that connect the joystick to the housing. | |
| [* black] Unscrew the thumb stick from the module if a replacement is not needed. | |
| - | [* icon_note] ''The circuit board is wired through glue. If the plastic spudger is unable to pry the glue off, use the metal spudger as a last resort.'' |