Wijzigingen in deze stap
Bewerken voor Cristian Rodriguez —
Bewerking goedgekeurd door Cristian Rodriguez
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] Refer to the back where the battery compartment is located and there should be two smaller screws. |
|---|---|
| - | [* black] Refer to the two large screws above the battery compartment. |
| + | [* black] Refer to the back where the battery compartment is located and there should be two smaller screws (6mm in length). |
| + | [* black] Refer to the two large screws (7mm) above the battery compartment. |
| [* black] Loosen these screws using the JIS1 head, this will give you access to remove the back plate. | |
| [* black] Grab it from the bottom of the device to gain access to the internal hardware. |