Wijzigingen aan stap #3
Bewerken voor Dave Empson —
Bewerking goedgekeurd door Dave Empson
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [* black] Cleaning the contacts in the previous step did not work, remove the 13 screws to split the lid in two as shown in the image and replace the lid (with mains turn off!) |
|---|---|
| + | [* black] With a multimeter, measure the resistance between the two terminals marked with green arrows. It should be about 60ohms. If it is not then, either the contacts in the previous step have not been cleaned enough or there is a break in the circuit due to a failed thermal fuse, thermostat or heating element. which requires further investigation. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd