Wijzigingen aan stap #10
Bewerken voor Nick Schultz —
Bewerking goedgekeurd door Nick Schultz
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [title] Solder the second resistor |
|---|---|
| [* black] Press the iron's tip against one of the board's ***R2*** solder pads for a few seconds to heat it. | |
| [* black] Feed the solder wire into the heated area until there's a concave pool of solder on the pad. | |
| [* black] Remove the solder wire first, then remove the soldering iron from the pad. |