Wijzigingen aan stap #3
Stap regels
| [title] Remove inner cover | |
| [* black] Unplug the three connectors for the toner control/ data cables (two from the control board and one from the power supply board) by pulling the connector up from the board | |
| - | [* black] De-route and remove these cables from the front cable |
| + | [* black] De-route and remove these cables from the front cable guide. |
| [* black] Unplug the fuser unit power cable by squeezing the top of the retaining clip and pulling the connector up from the power supply board. | |
| - | [* black] De-route the fuser unit power cable from the cable |
| + | [* black] De-route the fuser unit power cable from the cable guide on the back of the inner toner cover. |