Wijzigingen aan stap #3
Bewerken voor Carsten Frauenheim —
Bewerking goedgekeurd door Carsten Frauenheim
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Idle Mode | |
| [* icon_caution] Don't touch the heated tip of the soldering iron while in Idle Mode. | |
| - | [* icon_note] After 30 seconds of no movement, the soldering iron enters ***Idle Mode***, a low-power mode that sets the tip temperature to 200 °C by default. The LED will be static ***purple***. |
| - | [* black] Picking up a resting iron will wake it up, and the tip will automatically reheat to your set temperature. |
| - | [* icon_note] When powered by a Portable Power Station, warming from Idle Mode temperature to set temperature will only take a few seconds. |
| - | [* icon_note] While Idle Mode can be disabled, we recommend leaving it enabled to extend tip life. |
| + | [* icon_note] After 30 seconds of no movement, the soldering iron enters ***Idle Mode***, a low-power mode that reduces the tip temperature to 200 °C. |
| + | [* violet] The Idle Model LED is static ***purple***. |
| + | [* black] Picking up a resting iron wakes it from Idle Mode, and the tip will automatically heat back up to your set temperature |
| + | [* icon_note] When powered by a Portable Power Station, warming from Idle Mode temperature to set temperature will only take a few seconds. |
| + | [* icon_caution] While Idle Mode can be disabled, we recommend leaving it enabled to extend tip life. |