Skip to main content

Wijzigingen aan stap #1

Bewerking door Scott Dingle

Bewerking goedgekeurd door Scott Dingle

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* icon_caution] Before disconnecting the thermal sensor cable, take note of its orientation. It is extremely important to reinstall the connector in'''reversed''' from the rightcurrent orientation so the fans will not run at full speed.
[* icon_caution] Before disconnecting the thermal sensor cable, take note of its orientation. It is extremely important to reinstall the connector in'''reversed''' from the rightcurrent orientation so the fans will not run at full speed.
[* black] Disconnect the thermal sensor by pulling its connector away from the side of the hard drive.
[* icon_reminder] During reassembly, be sure that the thermal sensor connector is connected to set of pins closest to the SATA connectors. If the fans spin at full speed, reverse the connector's position.
[* icon_reminder] During reassembly, be sure that the thermal sensor connector is connected to set of pins closest to the SATA connectors. If the fans spin at full speed, reverse the connector's position.