Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_caution] Before disconnecting the thermal sensor cable, take note of its orientation. It is extremely important to reinstall the connector in the right orientation so the fans will not run at full speed.
[* black] Disconnect the thermal sensor by pulling its connector away from the side of the hard drive.
[* icon_reminder] During reassembly, be sure that the thermal sensor connector is connected to set of pins closest to the SATA connectors.