Wijzigingen aan stap #4
Bewerken voor Sergiu Partenie —
Bewerking goedgekeurd door Sergiu Partenie
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [title] Cleaning the solder, re-insulate |
|---|---|
| + | [title] Cleaning the solder, re-insulate wires |
| [* black] The AC wires actually have a crimped pin-plug on the end. You will have to use flux and soldering wick to clean as much solder from the so they fit back nicely in the original PCB holes. | |
| [* black] After the solder blobs on the pins are removed, insert two pieces of heat-shrink tubing over the wires and hear them with a lighter/match/candle/hot air gun. | |
| [* icon_note] Make sure the heat-shrink tubing won't cover the pins at the end of the wires, else you will have difficulties re-soldering them. | |
| [* black] Also use soldering wick to clean the two holes in the PCB for easier reassembly. |