Wijzigingen aan stap #12
Stap regels
| [title] Disconnecting | |
| - | [* violet] Finally remove screws holding down the power cord. Cut off all wires. |
| + | [* violet] Finally remove screws (Type T point, Phillips Truss head screw) holding down the power cord. Cut off all wires. |
| [* light_blue] This is the Rotary Switch that connects the dial and heating device. It has a bare shift actuator and I couldn't get it open but most likely houses the PCB board. | |
| [* orange] The red and green Led diffuser caps go top of the small Led bulb and next to the signs indicating 'empty' and 'on' |