Wijzigingen aan stap #6
Bewerken voor Francesco Valant —
Bewerking goedgekeurd door Francesco Valant
- Voor
- Na
- Ongewijzigd
Stap regels
| + | [title] Accessing the inner components of the Case |
|---|---|
| + | [* black] The internal part of the case is refreshingly glueless and held on by screwes. The only real bummer of this case is the USB-C port. Why would someone ever solder a port that is inherently prone to getting brocken? To make it more disposable. Everything else can be very easily maintained. |
| + | [* black] The two halved of the case are connected with a ribbon cable that is not subjected to stress and is easily disconnected if needed. The pairing button has solder pads that look big enough to easily replace it. The PCB is held on with screwes that are easily removed. They thread through a plastic thread so be careful to not overtighten them. |
| + | [* black] The Case probably scores a decent 7/10 for repairability. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd
Afbeelding 2
Geen vorige afbeelding
Toegevoegd
Afbeelding 3
Geen vorige afbeelding
Toegevoegd