Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan

Voor
Na
Ongewijzigd

Stap regels

[* black] In the following steps, you will be placing the remaining pieces of adhesive on the front panel.
-[* black] ***Do not peel the black backing off the strips just yet.***
+[* black] ***Do not peel the clear backing off the strips just yet.***
[* black] Place the bridge shaped adhesive strip between the top edge of the inner frame of the front panel and the camera mounting bracket.
[* black] Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.