Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #18

Bewerking door Andrew Bookholt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the following screws:
[* black] New linered] Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.
[* black] New lineorange] Two 8 mm Phillips screws securing the DC-in board to the upper case.
[* black] New linered] Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.
[* black] New lineorange] Two 8 mm Phillips screws securing the DC-in board to the upper case.
[* icon_caution] Do not remove the logic board yet! There are connectors attached to the underside of the logic board that must first be disconnected.

Afbeelding 1

Oude versie

Nieuwe versie