| + | [* black] Heat the soldering iron to middle high heat. |
|---|
| + | [* black] Once the soldering iron is fully heated, inject a small amount of flux onto the LED solder connection you wish to replace. |
|---|
| + | [* black] Place the solder wick on top of the solder joint. |
|---|
| + | [* black] Press the soldering iron on top of the solder wick on top of the solder joint, and press until you see the solder come through the wick. |
|---|
| + | [* black] Once you see the solder through the wick (it should look silver and not copper colored) pull the wick off the solder joint and remove the soldering iron. |
|---|