Alienware M11xR3 Disassembly and Cleaning stap #35 geschiedenis

Wijzigingen aan stap #35

Bewerken voor Adam O'Camb — 27 sep. 2017

Bewerking goedgekeurd door Adam O'Camb

	[title] Remove heat sink and apply thermal paste
-	[* icon_note] If this is your first time applying thermal paste, I recommend using a quality thermal paste brand like Arctic Silver and reading a guide here on iFixit.
+	[* icon_note] If this is your first time applying thermal paste, I recommend using a quality thermal paste brand like Arctic Silver and reading a [guide\|744\|guide\|new_window=true] here on iFixit.
	[* icon_caution] With the motherboard out, turn it upside down on a static free surface.
	[* black] To remove the heatsink and replace thermal paste, remove the screws in the correct order (marked with a number on the heatsink).
	[* icon_caution] Clean old thermal paste with isopropyl-alcohol. Ensure that after applying thermal paste it doesn't leak onto the motherboard (if it's on the green square, it's fine).
	[* icon_caution] When putting the heat sink back on, try to have the screw holes align on your first try. This is to maintain an even spread of the thermal paste.
	[* black] Rescrew in the correct order (refer to the numbers on the heat sink).
-	[* icon_note] ~~Torque~~ each screw one at a time to end up with good heat dissipation.
+	[* icon_note] Tighten each screw one at a time to end up with good heat dissipation.