Ga door naar hoofdinhoud

Wijzigingen aan stap #22

Bewerking door Ryan Velasco

Bewerking goedgekeurd door Scott Havard

Voor
Na
Ongewijzigd

Stap regels

-[* black] Here extract bus wire from, the board of power on and status LED
-[* icon_reminder] Always lift tab and extract it
+[title] Remove bus cable to Motherboard.
+[* black] Extract the bus cable with your needle nose plier by lifting the tab and pulling it away.
+[* icon_caution] If you computer doesn't power on check to make sure this cable is plugged in.
+[* icon_reminder] Always lift tabs to free cables.