Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Adam O'Camb

Bewerking goedgekeurd door Adam O'Camb

Voor
Na
Ongewijzigd

Stap regels

[title] Remove back plate screws.
[* black] 1. Gently flip over the laptop so that the bottom side is facing up.
-[* yellow] Locate the 8 screws lining the perimeter of the base-plate. (1 screw is located directly in the center)
-[* yellow] Remove the 8 screws securing the base-plate with a Phillips #1 Screwdriver.
+[* yellow] Use a Phillips #1 screwdriver to remove the 8 screws securing the base-plate.