Wijzigingen in deze stap
Bewerken voor Sydney Askins —
Bewerking goedgekeurd door Sydney Askins
- Voor
- Na
- Ongewijzigd
Stap regels
| [* icon_caution] Make sure the laptop is powered off and unplug all cables before beginning any repair. | |
| [* black] Flip your laptop over and place on a flat surface so you can access the screws on the base cover. | |
| [* red] Using a Phillips #0 screwdriver, remove the ten screws from the underside of the case . | |
| - | [* icon_note] The four screws on the front edge of laptop are |
| + | [* icon_note] The four screws on the front edge of laptop are 4mm, and the back six are 7mm. All will use the same sized screwdriver. |