Wijzigingen aan stap #3
Bewerken voor Spencer Day —
Bewerking goedgekeurd door Spencer Day
- Voor
- Na
- Ongewijzigd
Stap regels
| - | [* black] |
|---|---|
| - | [* icon_note] The cable should come out |
| + | [* black] Gently pull the board straight up so the cable comes out of its socket. |
| + | [* icon_note] The cable should come out easily. If you feel any resistance, push the latch up a little more and try again. |
| [* icon_reminder] During reassembly: | |
| [* black] Put the cable into its socket so the blue tab is on the same side as the connector's latch. | |
| [* black] Use the flat end of a spudger to [link|https://guide-images.cdn.ifixit.com/igi/HPuRqF3Fa3LVLjsT.full|push the latch straight down|new_window=true] into its locked position. |