Asus ROG Ally Motherboard Removal stap #4 geschiedenis

Wijzigingen aan stap #4

Bewerken voor Spencer Day — 14 dec. 2023

Bewerking goedgekeurd door Spencer Day

	[title] Remove the right thumbstick assembly
	[* black] Insert the flat end of a spudger between the bottom left edge of the thumbstick assembly and the chassis.
	[* black] Pry up the thumbstick assembly and remove it.
	[* icon_reminder] During reassembly:
	[* black] Orient the board over your device thumbstick side down.
	[* black] Thread the thumbstick ring cable through its [link\|https://guide-images.cdn.ifixit.com/igi/jW1ZHjoByJCswcDh.full\|cutout on the board\|new_window=true].
-	[* black] Lift the left edge of your device and push the thumbstick assembly firmly into place so the [link\|https://guide-images.cdn.ifixit.com/igi/RX2E3HUXgDsduJNX.full\|~~circular cutouts on the left edge\|new_window=true]~~ go over their alignment posts. The board should stay firmly in place.
+	[* black] Lift the left edge of your device and push the thumbstick assembly firmly into place so the small circular cutouts on the left edge [link\|https://guide-images.cdn.ifixit.com/igi/RX2E3HUXgDsduJNX.full\|go over their alignment posts\|new_window=true]. The board should stay firmly in place.