Wijzigingen aan stap #6
Bewerken voor Alex Diaz-Kokaisl —
Bewerking goedgekeurd door Alex Diaz-Kokaisl
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Remove the left thumbstick assembly | |
| [* black] Insert the flat end of a spudger between the bottom right edge of the thumbstick assembly and the chassis. | |
| [* black] Pry up the thumbstick assembly and remove it. | |
| - | [* icon_reminder] During reassembly, lift the right edge of the chassis and push the thumbstick assembly firmly into place so the small circular cutouts on the right edge [link|https://guide-images.cdn.ifixit.com/igi/GW4swHTQ2Z2sZNXA.full|go over their alignment posts|new_window=true]. The board should stay firmly in place. |
| + | [* icon_reminder] During reassembly: |
| + | [* black] Orient the board over your device thumbstick side down. |
| + | [* black] Thread the thumbstick ring cable through its [link|https://guide-images.cdn.ifixit.com/igi/jW1ZHjoByJCswcDh.full|cutout on the board|new_window=true]. |
| + | [* black] Lift the right edge of your device and push the thumbstick assembly firmly into place so the small circular cutouts on the right edge [link|https://guide-images.cdn.ifixit.com/igi/GW4swHTQ2Z2sZNXA.full|go over their alignment posts|new_window=true]. The board should stay firmly in place. |