Wijzigingen aan stap #1
Bewerken voor Spencer Day —
Bewerking goedgekeurd door Spencer Day
- Voor
- Na
- Ongewijzigd
Stap regels
| [title] Unfasten the back cover | |
| [* icon_note] Throughout this repair, [product|IF145-491|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from. | |
| - | [* red] Use a Phillips screwdriver to remove the five 17.2 mm‑long screws securing the top edge and bottom corners of the back cover. |
| - | [* orange] Use a Phillips screwdriver to ''fully loosen'' the remaining captive screw at the center of the bottom edge. This should create a small gap between the back cover and chassis. |
| + | [* red] Use a Phillips #0 screwdriver to remove the five 17.2 mm‑long screws securing the top edge and bottom corners of the back cover. |
| + | [* orange] Use a Phillips #0 screwdriver to ''fully loosen'' the remaining captive screw at the center of the bottom edge. This should create a small gap between the back cover and chassis. |
| [* icon_caution] Don't try to remove this screw. |