Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #4

Bewerking door airshack

Bewerking goedgekeurd door Jake Devincenzi

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use the flat end of a spudger to pry theCarefully pry the delicate rear speaker connector up off the logic board. These small L/R speaker connectors are quite easily broken.
[* icon_caution] This connector is very delicate and easily brokendestroyed. Consideration should be given to using a small flathead screwdriver or small pinhead to remove this connector in particular. USING THE SPUGER (as depicted) IS LIKELY TO BREAK THIS CONNECTOR.
[* black] Use the flat end of a spudger to pry theCarefully pry the delicate rear speaker connector up off the logic board. These small L/R speaker connectors are quite easily broken.
[* icon_caution] This connector is very delicate and easily brokendestroyed. Consideration should be given to using a small flathead screwdriver or small pinhead to remove this connector in particular. USING THE SPUGER (as depicted) IS LIKELY TO BREAK THIS CONNECTOR.