Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door janesem

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Use a spudger to pry the fan connector straight up off the logic board.
[* icon_caution] Be careful! These connectors are fragile.
[* black] NOTE: Ensure you don't pull the entire assembly straight up or the base will come off the logic board. Use an extremely small straight blade screw drive to gently loosen the inside assembly while gently pulling on the wire bundle! Will save buying a new logic board!!!!