Wijzigingen in deze stap
Bewerken voor Jossel Solis —
Bewerking goedgekeurd door Jossel Solis
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Remove the backing of the laptop to expose the hardware. | |
| - | [* black] This is done by unscrewing the Japanese Industrial Standard (J) screws holding the laptop backing in place. Use the Ifixit screw driver for this. The Ifixit screwdriver has the 'J0' bit. |
| + | [* black] Use the iFixit screw driver to unscrew the Japanese Industrial Standard (J) screws holding the back cover in place. |
| + | [* icon_note] The screwdriver should have the J0 top bit. |
| [* black] Pry the backing off with the Ifixit opening tool. | |
| - | [* black] It is helpful to get an opening and carry that around the backing of the laptop. The cover should lift off easily if done correctly. |
| - | [* black] Locate the optical disk drive amongst the hardware. |
| - | [* black] It is located in the upper left corner of this device. |
| + | [* icon_note] It is helpful to get an opening and carry that around the backing of the laptop. The cover should lift off easily if done correctly. |
| + | [* black] Locate the optical disk drive amongst the hardware. It is located in the upper left corner of this device. |