Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #3

Bewerken voor 907fixer —

Bewerking goedgekeurd door 907fixer

Voor
Na
Ongewijzigd

Stap regels

[* red] Put your thumbs on the two tabs surrounding the RAM sticks and push down.
+[* icon_note] This requires a lot of pressure, so don't be afraid to give it some force.
[* green] If you need more room, you can unplug the SATA cables that connect the hard drive and DVD drive to the computer- just make sure you plug them back in when you finish.
-[* black] Grasp the module by the top or sides when pulling out. Take care to not touch the delicate pins at the bottom or the chips on the surface.
-[* icon_note] This requires some force, don't be afraid to push hard.
-[* icon_note] You may have a different number of modules depending on your configuration.
+[* black] Pull the module out by the top or the sides. Take care not to touch the delicate pins at the bottom and the chips on the surface.
+[* icon_note] You may have a different number of modules depending on your configuration. If you have one or more empty slot, you can skip to step 4.