Ga door naar hoofdinhoud

Wijzigingen aan stap #6

Bewerking door Jake Devincenzi

Bewerking goedgekeurd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* black] Lift the display for enough clearance to disconnect the LCD thermal sensor cable connector from its socket on the logic board.
-[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile so be very careful when you connect back the sensor cable!
+[* icon_note] If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable. The thermal sensor connector socket is very fragile, so be very careful when you connect back the sensor cable.