Wijzigingen aan stap #5
Stap regels
| + | [title] Analog sticks on the daughter board |
|---|---|
| + | [* black] The side of the analog stick reads: ''2124IC''. |
| + | [* black] The analog sticks are frictionless and use green potentiometers, not sure if these are ALPS potentiometers similar to those in the Xbox series controllers. |
| + | [* blue] The blue circle next to this stick is the trigger's hall-effect sensor which senses the magnet installed on the side of the trigger. The other sensor is mounted similarly on the opposite side of the board near the B button. |
| + | [* black] The middle of the daughter board has an adhesive strip covering some of the solder joints and a few test points. Perhaps some isoprophyl alcohol can soften the adhesive to remove the black strip if necessary. |
Afbeelding 1
Geen vorige afbeelding
Toegevoegd
Afbeelding 2
Geen vorige afbeelding
Toegevoegd
Afbeelding 3
Geen vorige afbeelding
Toegevoegd